mediflow Volumetric Infusion Pumps

– Extremely simple to use.

– Operates in: ml/min, ml/h and ml/24h.

– Calculates flow rate basing on volume and delivery time.

– Micro-infusion – flow rate from 0.1 ml/h

Extended features:

– Infusion flow rate programmable in ml/h and other frequently used units including: ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min, h, 24 h.

– Numerous infusion modes such as: continuous infusion, intermittent infusion, infusion with profile (up to 24 cycles).

– In addition, can store in memory a drug library of 120 full drug dosing protocols, with infusion parameter limits.

– Displays drug name throughout infusion.

– Comprehensive configuration options: advanced protection system, night mode, alarm options.

– Micro-infusion – flow rate from 0.1 ml/h

– Soft limits (min max) warn when recommended values are exceeded but do not prohibit the introduction of changes. Hard limits (min max) disable introduction of any values from outside prescribed range.

Basic Functions:

Large and legible graphic display which constantly displays:

  • Name of the medicine
  • Flow rate
  • Power status and power supply type
  • Infusion pressure and preset occlusion alarm level

Simple to set up and easy to operate – Quick data entry with the use of numerical keyboard. All parameters can be adjusted without infusion interruption.

Different infusion units ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min / hour / 24h.

Data lock – Programmed parameters can be password-protected. Additionally, sophisticated function protection system allows blocking access to chosen functions, i.e. infusion start, bolus start, occlusion threshold change, pump switching-off.

Multi transfusion set – Compatible with standard PVC IV sets for 9 to 60 drops/min. working with/without drop detector.

Automatic IV set loading simplifying and speeding up pump setup, maintenance and reducing the initial infusion errors.

Battery operation- Equipped with rechargeable battery to operate 20 hours at 5 ml/h with recharging time of 5 hours

Bolus fully automatic and manual – Possibility of programming dose, time or flow rate.

Air detector – Equipped with ultrasonic, programmable sensitivity, sensor to deliver safe infusion

Anti-bolus System – Automatic reduction of residual bolus after occlusion release.

11 levels of occlusion pressure – Possibility to adjust the pressure level during infusion. Pressure indication displayed constantly during delivery and safe to be used for infants

Sophisticated system of alarms – Allows different tones and loudness. Built in night mode with the option to set lower sound level as well as reduce display brightness.

Event log – Allows storing full infusion history (parameters, operator activities and alarms along with the date and time of occurrence) 2000 evens. The stored information can be viewed either on the pump’s display or on PC.

Drug library – Up to 120 drug dosing procedures can be stored in pump’s memory along with all the essential infusion parameters. Additionally, upper and lower, soft and hard limits for all infusion parameters can be entered in a drug library to minimize medications errors and ensure overdose protection. Soft limits warn about exceeding recommended values, but do not block values entered. Hard limits prevent from entering values that are beyond the range. The drug library can be entered as follows:

  • directly from the pump keyboard
  • sent from pump to pump by RS232 interface
  • created in Medika Drug Editor software and set to the pump directly from a PC